Remote_Control_Light_Touch_Switches_for_smarthome.jpg Wireless_Remote_Control_Make_Your_Life_Brighter_and_Easier.jpg Topsmart_tempered_glass_panel_remote_touch_switch_for_smarthome.jpg Topsmart_Intelligent_Wifi_Power_Plug_for_smarthome.jpg New_Cooperation.jpg

Two or Three Loads RF433 Remote Receiver (Controller) Paired With Remote Controller For Smart Lighting Control

TOPSmart 2 or 3 Loads RF Remote Receiver(controller) can be paired with all remote controller such as 4/15 keys Remote Controller, RC Scene Switch and Multi-function scene switch Powered by Mains AC, RC Switch Panel powered by DC battery, Almighty RC Touch light Switch. High-power Load: 2000W per load can be used for all lamps. Easy for installation and setting. Power supply: AC85V~AC265V.

More details

Bookmark and Share

RF remote controller for remote controlling the lamps for smarthome

 

Applications

For home, office, hotel, KTV, etc.

Applications For home, office, hotel, KTV, etc.  Models for your choice 1 load, 2 load, 3 load Specification Model	1RMK2000, 2RMK2000, 3RMK2000 Wiring	Mains AC N+L Power supply	AC85V-AC265V; 50hz-60hz Type	1 gang, 2 gang, 3 gang Power Load	Resistive Load:2000W per gang; Inductive load:500W per gang Max current	10A Static power	<0.5W  Basic Function 1)	Easy for installation 2)	High-power consumption make it compatible with all kinds of lamps 3)	Small button for turn on and turn off the lamp locally 4)	Can be paired and controlled by multi-remotes 5)	Remote wireless control to save cables and cost  6)	Paired with Multi-function remote switch or Multi-function scene switch to make the remote switch real-time shows the lamps’ On and OFF 7)	Overload and Overheat protections  How to set up the RF Remote Controller Can be paired and controlled by: 4/15 keys Remote / Remote Scene Switch powered by Mains AC /Remote Scene Switch Panel powered by DC battery / Multi-function Remote Switch or  Multi-function Scene Switch 1)	On and Off Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, then release the button and press any button of the remotes above in red  2)	ALL ON Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, two times after 4 seconds, then release the button and press any button of the remotes above in red 3)	ALL OFF Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, then release the button and press any button of remotes above in red 4)	Clear up the RF code Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, 4 flashes after 8 seconds, then release the button, all the RF code will be cleared up and return back into factory mode  Note: Please kindly initialize the RF remote controller into factory mode before you do any pairing operation The lamps’ status of ON&OFF can be real-time showed by the LED Backlight RED(ON) and Blue(OFF) of Multi-function Remote Touch Switch or Multi-function Remote Scene Switch only under the switch mode but not the scene mode  a)	Pair the “ALL ON” function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Red b)	Pair the “ALL” OF function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Blue


 

Models for your choice

1 load, 2 load, 3 load

 


Specification

Model

1RMK2000, 2RMK2000, 3RMK2000

Wiring

Mains AC N+L

Power supply

AC85V-AC265V; 50hz-60hz

Type

1 gang, 2 gang, 3 gang

Power Load

Resistive Load:2000W per gang; Inductive load:500W per gang

Max current

10A

Static power

<0.5W

 

Basic Function

1) Easy for installation

2) High-power consumption make it compatible with all kinds of lamps

3) Small button for turn on and turn off the lamp locally

4) Can be paired and controlled by multi-remotes

5) Remote wireless control to save cables and cost

6) Paired with Multi-function remote switch or Multi-function scene switch to make the remote switch real-time shows the lamps’ On and OFF

7) Overload and Overheat protections

Applications For home, office, hotel, KTV, etc.  Models for your choice 1 load, 2 load, 3 load Specification Model	1RMK2000, 2RMK2000, 3RMK2000 Wiring	Mains AC N+L Power supply	AC85V-AC265V; 50hz-60hz Type	1 gang, 2 gang, 3 gang Power Load	Resistive Load:2000W per gang; Inductive load:500W per gang Max current	10A Static power	<0.5W  Basic Function 1)	Easy for installation 2)	High-power consumption make it compatible with all kinds of lamps 3)	Small button for turn on and turn off the lamp locally 4)	Can be paired and controlled by multi-remotes 5)	Remote wireless control to save cables and cost  6)	Paired with Multi-function remote switch or Multi-function scene switch to make the remote switch real-time shows the lamps’ On and OFF 7)	Overload and Overheat protections  How to set up the RF Remote Controller Can be paired and controlled by: 4/15 keys Remote / Remote Scene Switch powered by Mains AC /Remote Scene Switch Panel powered by DC battery / Multi-function Remote Switch or  Multi-function Scene Switch 1)	On and Off Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, then release the button and press any button of the remotes above in red  2)	ALL ON Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, two times after 4 seconds, then release the button and press any button of the remotes above in red 3)	ALL OFF Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, then release the button and press any button of remotes above in red 4)	Clear up the RF code Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, 4 flashes after 8 seconds, then release the button, all the RF code will be cleared up and return back into factory mode  Note: Please kindly initialize the RF remote controller into factory mode before you do any pairing operation The lamps’ status of ON&OFF can be real-time showed by the LED Backlight RED(ON) and Blue(OFF) of Multi-function Remote Touch Switch or Multi-function Remote Scene Switch only under the switch mode but not the scene mode  a)	Pair the “ALL ON” function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Red b)	Pair the “ALL” OF function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into BlueApplications For home, office, hotel, KTV, etc.  Models for your choice 1 load, 2 load, 3 load Specification Model	1RMK2000, 2RMK2000, 3RMK2000 Wiring	Mains AC N+L Power supply	AC85V-AC265V; 50hz-60hz Type	1 gang, 2 gang, 3 gang Power Load	Resistive Load:2000W per gang; Inductive load:500W per gang Max current	10A Static power	<0.5W  Basic Function 1)	Easy for installation 2)	High-power consumption make it compatible with all kinds of lamps 3)	Small button for turn on and turn off the lamp locally 4)	Can be paired and controlled by multi-remotes 5)	Remote wireless control to save cables and cost  6)	Paired with Multi-function remote switch or Multi-function scene switch to make the remote switch real-time shows the lamps’ On and OFF 7)	Overload and Overheat protections  How to set up the RF Remote Controller Can be paired and controlled by: 4/15 keys Remote / Remote Scene Switch powered by Mains AC /Remote Scene Switch Panel powered by DC battery / Multi-function Remote Switch or  Multi-function Scene Switch 1)	On and Off Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, then release the button and press any button of the remotes above in red  2)	ALL ON Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, two times after 4 seconds, then release the button and press any button of the remotes above in red 3)	ALL OFF Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, then release the button and press any button of remotes above in red 4)	Clear up the RF code Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, 4 flashes after 8 seconds, then release the button, all the RF code will be cleared up and return back into factory mode  Note: Please kindly initialize the RF remote controller into factory mode before you do any pairing operation The lamps’ status of ON&OFF can be real-time showed by the LED Backlight RED(ON) and Blue(OFF) of Multi-function Remote Touch Switch or Multi-function Remote Scene Switch only under the switch mode but not the scene mode  a)	Pair the “ALL ON” function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Red b)	Pair the “ALL” OF function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into BlueApplications For home, office, hotel, KTV, etc.  Models for your choice 1 load, 2 load, 3 load Specification Model	1RMK2000, 2RMK2000, 3RMK2000 Wiring	Mains AC N+L Power supply	AC85V-AC265V; 50hz-60hz Type	1 gang, 2 gang, 3 gang Power Load	Resistive Load:2000W per gang; Inductive load:500W per gang Max current	10A Static power	<0.5W  Basic Function 1)	Easy for installation 2)	High-power consumption make it compatible with all kinds of lamps 3)	Small button for turn on and turn off the lamp locally 4)	Can be paired and controlled by multi-remotes 5)	Remote wireless control to save cables and cost  6)	Paired with Multi-function remote switch or Multi-function scene switch to make the remote switch real-time shows the lamps’ On and OFF 7)	Overload and Overheat protections  How to set up the RF Remote Controller Can be paired and controlled by: 4/15 keys Remote / Remote Scene Switch powered by Mains AC /Remote Scene Switch Panel powered by DC battery / Multi-function Remote Switch or  Multi-function Scene Switch 1)	On and Off Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, then release the button and press any button of the remotes above in red  2)	ALL ON Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after two seconds, two times after 4 seconds, then release the button and press any button of the remotes above in red 3)	ALL OFF Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, then release the button and press any button of remotes above in red 4)	Clear up the RF code Quick press the small setting button two times and keep pressing, the LED indicator will flash one time after 2 seconds, two flashes after 4 seconds, three flashes after 6 seconds, 4 flashes after 8 seconds, then release the button, all the RF code will be cleared up and return back into factory mode  Note: Please kindly initialize the RF remote controller into factory mode before you do any pairing operation The lamps’ status of ON&OFF can be real-time showed by the LED Backlight RED(ON) and Blue(OFF) of Multi-function Remote Touch Switch or Multi-function Remote Scene Switch only under the switch mode but not the scene mode  a)	Pair the “ALL ON” function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Red b)	Pair the “ALL” OF function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Blue


 

RF Pairing of the RF Remote Controller

Can be paired and controlled by: 4/15 keys Remote / Remote Scene Switch powered by Mains AC /Remote Scene Switch Panel powered by DC battery / Multi-function Remote Switch or  Multi-function Scene Switch

1) On and Off

2) ALL ON

3) ALL OFF

4) Clear up the RF code

 

The lamps’ status of ON&OFF can be real-time showed by the LED Backlight RED(ON) and Blue(OFF) of Multi-function Remote Touch Switch or Multi-function Remote Scene Switch only under the switch mode but not the scene mode

a) Pair the “ALL ON” function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Red

b) Pair the “ALL” OF function of the RF Remote Controller and press the button of the Remote Switch to turn the LED backlight into Blue